Charlie Sparks works across Stanmore every week, from the station and Parramatta Road end through the terrace streets to the Petersham, Newtown, Enmore and Lewisham boundaries.
Stanmore’s Victorian and Federation housing carries a lot of roof detail: decorative ridge capping, finials, chimneys, bay windows and slate that was laid by hand a century ago. Two consequences follow. Street-facing planes in conservation areas are generally where council would rather not see panels, which usually pushes the array to the rear and reduces what is available. And the detailing itself eats usable area, because a plane broken up by chimneys and dormers holds far fewer full-size panels than its dimensions suggest. Neither is a reason not to install. Both are reasons to have someone measure it properly rather than quote from an aerial photograph.
And because we are local, we are still here when you need a service call, a warranty claim, or a battery added down the track.
Sydney power prices keep climbing, and large older homes are rarely efficient, so the bills reflect it. Solar erases your daytime grid draw, and a battery moves that free power into the expensive evening hours.
The federal STC incentive takes thousands off the upfront cost and comes straight off your quote. NSW battery incentives can stack on top, and we run every eligibility check and lodge the paperwork so nothing is left unclaimed.
Your own generation insulates you from retailer increases and network charges you have no say over. Add a battery and the essentials keep running through an outage, which counts in older streets where overhead lines and mature trees sit close together.
Keeping a century-old home in use and running it on clean power is a better environmental outcome than almost anything a new build can offer. Every unit generated on your own roof is one less drawn from fossil fuel generation.
We have kept the process straightforward, with no high-pressure sales calls and no surprise charges along the way.
Our crews are through Stanmore and the surrounding Inner West constantly, so a fault or a monitoring dropout is handled in days, not weeks. You are dealing with a local operation that answers the phone, not an interstate call centre.
Every installer on our team holds current Clean Energy Council accreditation, which is what makes your system eligible for the STC rebate, and every system is installed to AS/NZS 5033 and AS/NZS 4777 with proper isolation, labelling and handover documentation.
Slate, terracotta and decorative ridging on the Victorians, metal on rear additions, we have worked across all of them. We know which mounting systems suit slate without cracking it, how to lay out an array around chimneys and dormers, and what Inner West Council expects when panels are visible from a conservation-area street.
Every electrician we send out is fully NSW-licensed and our solar installers hold current CEC accreditation. Full public liability and workers compensation cover is in place on every job from the moment we arrive.
We install equipment with a proven Australian track record: Tier 1 panels backed by local support offices, and inverters from Fronius, Sungrow, SolarEdge and GoodWe. No obscure imports that leave you stranded when a warranty claim comes up.
Our quotes are scoped properly the first time. Usable area around the roof detailing, slate condition and handling, conservation constraints, switchboard condition and access are all assessed before we price the job.
We work the way tradespeople used to: straight conduit, torqued and labelled connections, a swept site, and a proper walkthrough before we leave. Call six months later with a question and you will get an answer, not voicemail.
Stanmore sits in the middle of our Inner West service area. If your suburb is on this list, our team is already working nearby most weeks.
Most Stanmore homes are completed in a single day. Slate roofs, layouts worked around chimneys and detailing, and two-storey properties can extend that to two days, and your quote states the timeframe clearly before you commit.
Usable area matters more than roof size here, since chimneys, dormers and conservation constraints all reduce what is available. Most Stanmore homes land between 5 and 8kW, with larger freestanding Victorians supporting more. We will give you the honest panel count first.
They are. Every installer on our team holds current Clean Energy Council accreditation, which is what makes your system eligible for the federal STC rebate and compliant with Australian standards.
Yes, and you will never see a form. The rebate comes off your quoted price before you pay anything, and we lodge the assignment paperwork on your behalf as part of every job.
Expect a 25-year performance warranty and a 10 to 15 year product warranty on Tier 1 panels, and 5 to 10 years on inverters depending on the brand, with extensions often available. Our own workmanship warranty covers the installation, including work on slate.
