Charlie Sparks works across Darling Point and the surrounding harbourside suburbs, from New South Head Road down the peninsula to Edgecliff, Double Bay, Rushcutters Bay and Point Piper.
This is strata territory, and often heritage strata, which adds a second layer. A common-property system serves the building’s lifts, ventilation, carpark and corridor lighting and pumps, usually the largest recurring line in a levy. But many buildings here are heritage listed or sit within conservation areas, so what can be seen from the street or the harbour is genuinely constrained, and roof space competes with existing plant. We establish what is approvable before designing anything, and write proposals a committee can put to a vote.
And because we are local, we are still here when you need a service call or a warranty claim.
For an apartment building the common-area bill runs continuously rather than in peaks, so it is a large and predictable cost. Offsetting it with rooftop generation reduces an expense every owner currently pays through their levies.
Smaller systems attract the federal STC incentive, deducted straight from your quote. Larger strata systems generally fall under a different certificate scheme, and we will tell you which applies to your building and handle the paperwork either way.
Generating on site insulates the building from retailer increases and network charges nobody controls, and it makes a major recurring cost predictable, which makes levy setting far easier year to year.
Apartments are the hardest housing type to decarbonise, and heritage apartments harder still, which makes every approved common-property system here a genuine achievement rather than a marginal gain.
We have kept the process straightforward, with no high-pressure sales calls and no surprise charges along the way.
Our crews are through Darling Point and the surrounding harbourside suburbs constantly, so a fault or a monitoring dropout is handled in days, not weeks. On a building where nobody watches the array daily, that response time matters.
Every installer on our team holds current Clean Energy Council accreditation, and every system is installed to AS/NZS 5033 and AS/NZS 4777 with proper isolation, labelling and handover documentation. We work to your building's induction and safety requirements as standard.
Membrane, concrete and metal deck on the apartment buildings, slate and terracotta on the older homes, we have worked across all of them. We know how to mount on a common-property roof around existing plant without compromising waterproofing, and what heritage controls mean for what can be seen from the street or the water.
Every electrician we send out is fully NSW-licensed and our solar installers hold current CEC accreditation. Full public liability and workers compensation cover is in place on every job from the moment we arrive.
We install equipment with a proven Australian track record: Tier 1 panels backed by local support offices, and inverters from Fronius, Sungrow, SolarEdge and GoodWe. On a strata asset expected to run for decades that track record matters far more than the headline price.
Our quotes are scoped properly the first time. Roof structure and waterproofing, existing plant, heritage constraints, switchboard and supply capacity, metering and building access are all assessed before we price the job.
We work the way tradespeople used to: straight conduit, torqued and labelled connections, a swept site, and a proper walkthrough before we leave. Call six months later with a question and you will get an answer, not voicemail.
Darling Point sits at the harbourside end of our Eastern Suburbs service area. If your suburb is on this list, our team is already working nearby most weeks.
A strata installation typically runs from two days to a week depending on building size and access. The longer part is approval: a committee vote, any heritage considerations and the network application all sit ahead of the work, and we give you a realistic timeline.
Strata systems are sized from the building’s common-property consumption and any EV charging planned, not from a household figure. On a heritage building the approvable roof area often sets the ceiling rather than the consumption itself.
They are. Every installer on our team holds current Clean Energy Council accreditation, which is what makes your system eligible for the applicable rebate and compliant with Australian standards.
Yes, and you will never see a form. For smaller systems the rebate comes off the quoted price before anything is paid. For larger strata systems we explain the applicable certificate scheme and manage that process for you.
Expect a 25-year performance warranty and a 10 to 15 year product warranty on Tier 1 panels, and 5 to 10 years on inverters depending on the brand, with extensions often available. Our own workmanship warranty covers the installation, including mounting and roof penetrations.
